Change part information on standard bill of material

Article • 4/27/2026 • 2 min read

A part’s bill of material contains information about the part and each of its components. You can change information about a part on a standard bill of material.

To change information about a part on a standard bill of material

  1. Open the Standard BOMs (BOM) page.

    1. Select Production Management > Master Data > Standard BOMs.

    Or

    1. Search for BOM or Standard BOMs in the Navigation box and then select Standard BOMs.

    The Standard BOMs (BOM) page appears.

  2. On the Toolbar, click Browse.

    The Browse For Standard BOMs window appears.

  3. Select a row that contains the required part and click Select. Or double-click the bill of material.

    Click Cancel to exit from the Browse For Standard BOMs window.

  4. To change information about a component part:

    1. Click the part in the list of parts.

    2. Make your changes.

    3. Click Save.

To change part information using bill of material builder

  1. Open the BOM Builder (BOMBLD) page.

    1. Select Production Management > Master Data > BOM Builder.

    Or

    1. Search for BOMBLD or BOM Builder in the Navigation box and then select BOM Builder.

    The BOM Builder (BOMBLD) page appears.

  2. On the toolbar, click Browse.

    The Browse For BOM Builder window appears.

  3. Select the row that contains the required bill of material and click Select. Or double-click the bill of material.

    Click Cancel to exit from the Browse For BOM Builder window.

  4. Click the part to change.

  5. Make your changes.

  6. Click Save. The part information changes are saved.

​